Видео

Thanks. I have a couple

WD-40 stands for Water Displacement Formula 40! 🤙

Yeah they are notorious for that!

It came with the refrigerator. What's the model of your refridgerator?

@@DadItYourselfDIY kitchen aid

Make sure the lever is in the detent and lift the handle up to off or on. If it cannot switch the unit off, you may need to replace. Let me know what model and I can recommend a replacement icemaker.

You got it!!

Returns are always preferred, but they don't take everything back.

@@DadItYourselfDIY I have been lucky so far but honestly I have not had to return many Ryobi power tools.

@review4view Me neither.

ISN'T FLAT on back edge is what I meant to say.

@Dragon-Smoke-29 Do your shingles overhang the roof edge?

@@DadItYourselfDIY no

@Dragon-Smoke-29 Well that's not good.

The screw/nut on the handle is reverse thread. You can buy chain, or a new flapper comes with a chain.

@@DadItYourselfDIY ok so I can buy chain & it attaches to flapper?

@@DadItYourselfDIY also yes I screwed the nut on there properly but for some reason the outside handle on toilet is still loose so perhaps I just get new handle just learning as I don't need nosy landlord here😁

@e.salinas6553 Yes. www.homedepot.com/p/Fluidmaster-Flapper-Chain-5104/203763988

@@DadItYourselfDIY God bless you ✨💖🙏🏼 in Jesus Name

Glad it helped!

Glad it helped!!

Such an easy solution!

It can easily be scaled. 7' would make the transportation a little easier, but it doesn't affect the price very much. An assembled wheel is about $8000.00 plus transportation.

"For the Price"

@@DadItYourselfDIY Ryobi is for homeowners who look at a project and say, “I like it, good enough.” Festool is for professionals that are judged on the quality of their work. It’s a completely different standard.

Well I guess I'm not a professional, or have any skill. Thanks for that. Do you need any advice on how you make your living?

@@DadItYourselfDIY it wasn’t meant as an insult. Homeowners can be as skilled as as a pro. Sometimes they *are* pros. The difference is homeowners have all the time they need and can take as many cracks at it as they want. A professional carpenter is expected to get it done right the first time and any flaw is judged much more harshly. Don’t take it personally. I’m sure you’re good at what you do.

@sswwooppee I'm a professional general contractor, finish carpenter, and an advanced hobby woodworker. Doing it all with Ryobi. A sharp blade, a straight line, patience, and skill. The archer is who kills the enemy, not the arrow.

Got me.. but for the money..

Not very exciting. The 3D printed ones are popular now!

What?

Whatever works.

I had a DIY track before this. I prefer the Ryobi metal track.

Thanks!

@@DadItYourselfDIY going to use the same method on my replacement columns on my front porch

@thehound1359 Very nice!

I do not have A/C.

@@DadItYourselfDIYso, it won’t power a HVAC UNIT?

@Tfbjiv-rx9xr I'm sure it can, I just don't have one. It's all about balancing power. If you need 12Kw, then a 6500w wont work.

I actually installed one, and my 6500 generac did power the entire central AC. However, I'm sure it was pretty much at its maximum capacity. That being said I won't be powering the central AC in an outage.

@nathanallsup1224 I have a similar situation in that if I run my dryer and/or water heater (both 240v) I could overload. But who does laundry during a power outage!?

Thanks!

You can use a 1/8" or 1/4" straight flush trim bit.

No. You would have to bypass the interlock. This is dangerous and illegal. The way it's wired, you are plugging the house into the generator, not the other way around. If you plugged the rv in and left the mains on, the port is dead. If you flipped the interlock, the house would draw from the RV.

Noted!

I did. I never took it to the next step. It's just easier using two 18v batteries at this point.

@@DadItYourselfDIY ok

@ToolsNGames The project isn't dead, just on hold.

@@DadItYourselfDIY alright

What?

It's heading that way for sure.

I did go shorter this weekend, and it still looks GREAT! I'll post some pictures on Instagram and Facebook.

I agree with everything you said about the roundup.

Not a gas mower it's an electric weed eater ha ha love you videos 3.5 in. height they say. I like it alittle short like you but I have never had a really full lawn I would have it higher then.

That's was the idea!!

@bshandyateverything I actually change the height all season. I cut taller as it gets warmer.

@bshandyateverything It does make that sound at high speed. 🤣🤣

Great idea, and will never rot!!

Glad to help!

I'm not aware of one.

@@DadItYourselfDIY Thanks for the response. It's running rough and a friend suggested that it's probably time for a new fuel filter.

@gt-yh3ty Now I'm curious. I've never changed it if there is one. This mower is 10 years old now.

Probably not. This was a one off for a contest we were in. The Wheel of Fortune wheel is 16' in diameter and weighs 2500 pounds. Where would we even put it.

It was.

This job will cost you between $1000 and $2000 depending on how much material and what their rate is. Could be more, could be less.

@@DadItYourselfDIY Thank you!!!

You're very welcome!

@RB-gt8bf You're welcome.

Thanks!!

I just used it again this season, and it pulled up a bunch!!

@@DadItYourselfDIY Thanks, I’ll keep that in mind when making my decision. My yard needs a lot of work so maybe I should just bite the bullet and open it up ☺️

@djbille4283 Technically you already have. The money has been spent. 😁

@@DadItYourselfDIY True True, and I should consider my back, and time saved.

@djbille4283 There is that!

Thank you for the idea!

Oh, by the way, I make my living producing videos and their associated products. So there is that...

I only ran for two hours. Literature says 10 hours with a full tank and standard load. Lots of variables.

I'm working on the templates!!

Glad it helped!

Midwest here

There is definitely fescue in there, KBG and Rye as well.

We balanced it before delivery. The PIR Wheel weighs about 2,000 with all its accessories.

Pledge Lemon Spray.

There are four screws.

The blades are loose, and the pivot with centrifugal force, but can move out of the way if the mower hits something hard.

If you are interested in a custom wheel, you can reach me at DadItYourselfDIY@GMAIL.COM